DC/DC Converters TEN 8 Series, 8 Watt Features DIP-24 package with industry standard footprint Wide 2:1 input voltage range Input filter meets EN 55022, class A Extended operating temperature range: -40C to +85C Remote On/Off Shielded metal casing with insulated baseplate Lead free design, RoHS compliant 3-year product warranty The TEN 8 series is a family of high performance 8 Watt dc/dc-converter modules featuring wide 2:1 input voltage ranges in a DIP-24 package with industry standard footprint. A very high efficiency allows an operating temperature range of -40C to +85C. A built-in EMI input filter complies with EN 55022, class A without external components. Further standard features include remote On/Off and shortcircuit protection. Typical applications for these converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code Output voltage Output current max. Efficiency typ. TEN 8-1210 3.3 VDC 2`000 mA 80 % TEN 8-1211 5 VDC 1'500 mA 83 % 12 VDC 665 mA 88 % 15 VDC 535 mA 87 % 5 VDC 800 mA 83 % TEN 8-1222 12 VDC 335 mA 87 % TEN 8-1223 15 VDC 265 mA 85 % TEN 8-2410 3.3 VDC 2'000 mA 80 % TEN 8-2411 5 VDC 1'500 mA 83 % TEN 8-2412 12 VDC 665 mA 86 % 15 VDC 535 mA 85 % 5 VDC 800 mA 82 % TEN 8-2422 12 VDC 335 mA 86 % TEN 8-2423 15 VDC 265 mA 85 % TEN 8-4810 3.3 VDC 2'000 mA 80 % TEN 8-4811 5 VDC 1'500 mA 83 % TEN 8-4812 12 VDC 665 mA 86 % 15 VDC 535 mA 86 % 5 VDC 800 mA 85 % TEN 8-4822 12 VDC 335 mA 87 % TEN 8-4823 15 VDC 265 mA 87 % TEN 8-1212 TEN 8-1213 TEN 8-1221 TEN 8-2413 TEN 8-2421 TEN 8-4813 TEN 8-4821 http://www.tracopower.com Input voltage range 9 - 18 VDC (12 VDC nominal) 18 - 36 VDC (24 VDC nominal) 36 - 75 VDC (48 VDC nominal) Page 1 of 3 DC/DC Converters TEN 8 Series 8 Watt Input Specifications Input current (no load) Input current (full load) 12 Vin; 12 Vin; 24 Vin; 24 Vin; 48 Vin; 48 Vin; Surge voltage (100 msec. max.) 12 Vin models: 15 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. 3.3 VDC other output 3.3 VDC other output 3.3 VDC other output models: models: models: models: models: models: 720 mA typ. 800 mA typ. 360 mA typ. 400 mA typ. 180 mA typ. 200 mA typ. 12 Vin models: 36 V max.. 24 Vin models: 50 V max.. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A For 12 Vin models with external input capacitor: 4.7 F / 25 V 1210 MLCC ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 1 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 220 F, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy 1 % Regulation - Input variation Vin min. to Vin max 0.2 % max. - Load variation 0 - 100 % single output models: 1 % max. dual output models: 1 % max. (balanced load) 5 % max. (Load cross variation 25 % / 100 %) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ. Start up time (nominal Vin and constant resistive load) 700 ms max. - Remote on/off 5 ms typ. Transient response (25% load step change) 200 s typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max. typ. foldback Capacitive load 3.3 5 Vout models / 5 12 Vout models / 12 15 Vout models / 15 Vout Vout Vout Vout models: models: models: models: 3300 F max. 1600 F max. / 1000 F max. 350 F max. / 160 F max. 240 F max. / 100 F max. General Specifications Temperature ranges - Operating -40C to +85C - Casing +100C max. - Storage -55C to +105C Derating 3.3 %/K above +70C Humidity (non condensing) 95 % rel H max. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 8 Series 8 Watt General Specifications Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >3.5 Mio h Isolation voltage (60sec.) - Input/Output 1500 VDC Isolation capacitance - Input/Output 300 pF max. Isolation Resistance - Input/Output >1000 MOhm Switching frequency 300 kHz typ. (pulse width modulation PWM) Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F - Test conditions www.tracopower.com/products/mil810.pdf Safety approvals UL/cUL 60950-1, IEC/EN 60950-1 - Certification documents www.tracopower.com/overview/ten8 Remote On/Off Environmental compliance On: 3.5 ... 12 VDC or open circuit Off: 0 ... 1.2 VDC or short circuit pin 1 and pin 2/3 Off idle current: 2.5 mA - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive plastic Potting material epoxy (UL94V-0 rated) Weight 17 g (0.60oz) Soldering temperature max. 265C / 10 sec. Supporting documents: www.tracopower.com/overview/ten8 16 Bottom view (0.1) 2.54 (0.1) 2.54 23 22 (0.6) 15.24 5.08 (1.0) 25.4 32 (1.26) Pin-Out (0.2) 2.0 (0.08) Outline Dimensions 2.4 (0.1) 3.8 10.2 (0.15) (0.4) 9 11 14 Insulated Baseplate 1 2 3 15.24 Pin Single Dual 1 Remote On/Off Remote On/Off 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No con. Common 11 No con. -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (0.6) 20.3 (0.8) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Pin pich tolerances 0.25 (0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 13, 2018 Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEN 8-2423 TEN 8-1212 TEN 8-2412 TEN 8-2410 TEN 8-2411 TEN 8-1211 TEN 8-1210 TEN 8-1222 TEN 84823 TEN 8-4811 TEN 8-4813 TEN 8-2422 TEN 8-4810 TEN 8-2413 TEN 8-1223 TEN 8-4821 TEN 8-1221 TEN 8-2421 TEN 8-4822 TEN 8-4812 TEN 8-1213